There are no brake controller plug and play options on the 2011 Chevrolet Express Van, but a brake controller installation will be fairly simple if your van has the factory tow package with 7-way trailer connector.
If your van has the factory tow package, there will be a bundle of 4 or 5 wires under the dash for a brake controller. They will be wrapped with a white tag that indicates the function of each wire. The wires are cut off, so you will just need a universal brake controller harness... view full answer...
Per the manufacturer, The Buyers Product Hitch # 3371801102 overall width from mounting hole to mounting hole is 38-3/8 inches across from center on center. Then on each side starting with the hole that's towards the rear of the vehicle will measure 3-11/16 inches from the first to the center hole and 6-7/16 inches from first to the last hole. view full answer...
When it comes to installing a trailer wiring harness on your 2000 Chevrolet Express Van The T-One Vehicle Wiring Harness # 118377 is the best out of all the plug and play harnesses for your vehicle. The T-One harness are made out of a heavier gauge wire (16 gauge) and will last longer in the elements then the other options that we offer.
The harness will plug into your vehicle's wiring harness, which is located behind the driver's-side and passenger's-side interior trim panels in your... view full answer...
I will be happy to help you find all of the parts you need to tow your trailer with brakes using your 2017 Chevy Express 3500 Van!
To install a fully functional 7-Way connector, and ultimately a brake controller, on your Express Van you will need 4-Way wiring that carries the basic trailer light functions and the Universal Wiring Kit # ETBC7. For the basic light functions I recommend going with the T-One # 118392 which simply plugs in behind your tail lights (see attached installation... view full answer...
We do have a solution for you!
Since your 2017 Chevy Express Van doesn't have the factory tow package you will need to start off by installing a 4-Way connector. I recommend the T-One # 118392 if you don't have very many trailer lights or the Hopkins # 31345 if you have quite a few trailer lights. The T-One draws directly off of your OEM wiring while the Hopkins draws power straight from your battery via the included 12V wire.
Once the 4-Way is in place you need to install the Universal... view full answer...
For the front and rear anti-sway bars that fit your 2008 Chevy Express 3500 Cutaway Chassis you will need the following:
Front - # RM-1109-149
Rear - # RM-1109-175 view full answer...
To install the Hayes Engage Trailer Brake Controller # HA81760 on your 2020 Chevrolet Express Van you will need the Wiring Adapter # HA81789-HBC. If your van included the 7-way wiring you will need to check for the wiring taped and tucked under the driver side floor mat up towards the firewall. If you can not find the wiring here you may also have the blue output brake wire already ran from the back to the front. It is located under the dash near the emergency brake pedal.
If your Express... view full answer...
If your Express 3500's connector near the bumper resembles the round U.S. Car type connector in the photo I linked then this will be the trailer tow package connector you will use to plug in a 7-way trailer socket like # A10-7072VP or # HM40975.
With or without the tow package wiring you can still install a 7-way using the kit # ETBC7 you referenced along with a 4-pole harness # 118392 which plugs in at the tail lights. This setup will be independent of any factory wiring and it will provide... view full answer...
It sounds like you're looking for the wiring that is used on a 2014 Chevy Express that has the factory tow package wiring, which the Hopkins Plug-In Simple Wiring Harness for Factory Tow Package - 4-Pole Flat Trailer Connector # 41155 is compatible with. The Curt # 55540 is designed for Express vans that don't have the factory tow package, so if your van didn't have the tow package you will need to use this harness.
If you also need a hitch to replace the one you took off, the etrailer... view full answer...
There are several items needed to flat tow your 2017 Jeep Wrangler Unlimited behind an RV: base plates, a tow bar, safety cables, lighting, and supplemental braking.
For base plates you can use the Roadmaster base plates # RM-521448-4. Please note the base plates do not fit Hard Rock or 75th Anniversary models. I have linked a video showing an example installation for you.
For a compatible tow bar you can use the popular Falcon 2, # RM-520. I have linked a video review of this tow bar... view full answer...
I recommend the Longview Custom Towing Mirrors # LVT-1700 for your 2023 Chevrolet Express Van. These custom towing mirrors will slip over your vehicle's factory side view mirrors and will help extend your line of sight. The mirrors have an aerodynamic shape that will help prevent vibration and wind noise you will get when driving. The mirrors have a quick, slip on installation with no tools needed, and are manufactured in The USA.
I linked an installation video below of the Longview mirrors... view full answer...
We have just what you're looking for when it comes to single wire lights, which are grounded to the surface they're mounted on. For the red lights you can use the # MC95RB and the amber lights you can use the # MCL95AB. Both of these are incandescent clearance lights that will work well to replace your old lights.
I've also linked our entire selections of both the red and amber lights sorted so they're easy to find in case you're looking for something a different size. view full answer...
I do show that the Hollywood Racks 2 Bike Rack # HR200Z is compatible with use on motorhomes.
Some bike racks are not made to withstand the extra stress associated with bouncing on the back of an RV, but that is not the case here, so you will not have any issue using the # HR200Z on your motorhome.
For your question regarding the hitch adapter; I have confirmed with Hollywood Racks that the Replacement Hitch Adapter Sleeve # HRREDADA will work for your rack. I have attached a demonstration... view full answer...
Yes, you can use the Curt Echo Wireless Brake Controller - 7-Way Plug Mount w/ Bluetooth App # C51180 which plugs into your existing 7 way and provides your truck and trailer with trailer braking capabilities.
To control or adjust your braking, you'd just need to download the OneControl app from your app store and you'll be all set.
If you're looking for an adapter that lets you use the 4 pole and the 7 way at the same time then you unfortunately are not going to be able to because manufacturers... view full answer...
Thanks for all of the info! We have exactly what you're looking for!
To have more than 1 camera paired to a Furrion monitor you need the 5" Monitor Kit # FOS05TASF and an additional Vision S Camera # FCN48TASF (as both monitor kits come with an initial camera). Just install one camera on your 2020 Grand Design 3000QB and the other on your 2012 Chevy Express Van and then you can move the monitor to whichever vehicle you are operating (if you use a different vehicle to tow your Grand Design).
Furrion... view full answer...
Yes, we do have tire chains for 245/75-16 tires. They are the Titan Chain Mud Service Snow Tire Chains - Ladder Pattern - Twist Link item # TC2439. These mud service tire chains give you extra traction in snow and mud. The rounded twist links limit jarring, and the ladder pattern assists with effective starts and stops. view full answer...
For your 2019 Chevy Express Van I recommend going with the Tekonsha Prodigy P3 # 90195 brake controller. This is a great brake controller that applies the brakes on your trailer at the same time and with the same intensity as the brakes on your van. The LCD screen is also a great feature that makes operation much easier than many other similar controllers.
The wiring part will vary depending on what you already have installed on your vehicle. If your Express Van came with a 7-Way then... view full answer...
If your 2004 Chevy Express van came with a factory installed 7-Way connector and you need to replace it then you can use connector # HM40975 which will provide both a 7-Way and4-Way connector. But if your van did not come with a factory installed 7-Way the wiring for this connector may not be present.
If you do not have any trailer wiring at all on your van then to add a 7 and 4-Way you will need to start by installing a 4-Way flat connector, # 118392. Then to add the 4/7-Way you will... view full answer...
Since the Roadmaster Rear Anti-Sway Bar Item # RM-1109-173 is meant for as a stock sway bar replacement we don't carry the brackets but we do have a confirmed fitting sway bar with the brackets together - Roadmaster Rear Anti-Sway Bar Item # RM-1109-175. view full answer...
Thanks for the picture! To attach the Rhino-Rack Pioneer Platform Roof Tray item # RR85TB you purchased to Rhino-Rack RTC-Style Roof Rack Tracks item # RTC18 you will need the Rhino-Rack Quick Mount Legs for Vortex Aero Crossbars - RTC and RT Roof Rack Tracks - Qty 4 item # RRRLT600. The quick mount legs let you mount 2 Vortex Aero crossbars to RTC style roof rack tracks. view full answer...
Go To Results